IKA RW 47 digital - Manual (Page 6)

6
Contents
EC-Declaration of conformity
Explication of warning symbols
We declare under our sole responsibility that this product corresponds to the regulations 2006/42/EC and 2004/108/ EC and
conforms with the standards or standardized documents: EN 61010-1, -2-051; EN 12 100-1, -2; EN 61326-1 and EN
60204-1.
EN Source language: German
General hazard
This symbol identifies information that is of vital importance for safeguarding your health
and safety. Disregarding this information can lead to health impairment and injuries.
This symbol identifies information that is of importance for the technically correct functioning
of the system. Disregarding this information can result in damage to the instrument or to system
components.
This symbol indicates information which is important for ensuring that the operations of the
instrument are performed efficiently and for using the instrument. Failure to observe this
information can result in inaccurate results.
DANGER
CAUTION
WARNING
Page
EC-Declaration of conformity 6
Explication of warning symbols
6
Safety instructions 7
Correct use 9
Unpacking 9
Useful information
9
Drive 9
Motor circuit breaker
10
Gear speed change 10
Output shaft 10
Speed display 10
Commissioning 10
Securing
11
Switching on the instrument 11
Maintenance and cleaning 12
Error codes 13
Warranty 13
Accessories 13
Permitted IKA
® stirrer tools 13
Technical data 14
Wiring diagram 15, 16