Technical data, Associated standards and regulations – IKA Vibrax VXR basic User Manual

Page 10

Advertising
background image

Construction in accordance with the foolwing EMC standards
IEC 61 326-1

Associated EU guidlines
EMC-guidlines: 89/336/EWG 93/31/EWG
Machine guidelines: 73/023/EWG

design voltage:

VAC

230±

10%

or

VAC

115±

10%

design frequency:

Hz

50/60

input power:

W

38

output power:

W

6,5

Speed range:

rpm

0 - 2000 (infinitely

adjustable)

Speed setting:

Turn dial on front side)

Speed display:

Stepless scale

Drive:

Speed controlled asyn-

chronous motor

Agitation stroke

mm

4 Ø

Shaking motion:

horizontal, circular

Perm. duration of operation: %

100

Perm. ambient temperature: °C

+5 to +40

Perm. relative humidity:

%

80

prozection class acc. DIN 40 050:

IP 21

protection class:

II

overvoltage category:

II

contamination level:

2

operation at a terrestrial altitude:m

max. 2000 above sea level

max. load:

kg

2 (including attachment)

dimensions: (W x D x H)

mm

157x247x130 (without
attachment)

weight:

kg

5,7

10

VXR 032001

Technical data

VX 2 Reagenzglasaufsatz
This attachment can be used to generate a powerful stirring cur-
rent in as many as 36 test tubes with Ø16mm. In this case as
well, you should pass through a critical speed quickly.

VX 2E Eppendorf attachment
This attachment can be used to receive 64 closed Eppendorf
tubes with Ø 10,5mm.

VX 7 bowl attachment
This attachment is suitable for setting flasks, dishes and similar
containers in place when they are not fastened. This attachment
is therefore suitable for slow swiveling motions and is only used
for a maximum of 700 rpms. The large holding surface of 200 x
400mm makes it possible to place several dishes on the attach-
ment simultaneously.

VX 8 universal attachment
The universal attachment allows you to place Erlenmeyer flasks,
standing reactors, flasks and roundn angled or other containers
on the attachment. A fixed rubber-coated roller and a movable
spring-loaded rubber roller are used to secure containers in
place. If several Erlenmeyer flasks are clamped in place at the
same time, for example, they must have the same Ø. Securing
the three clamping screws very tightly makes it possible to work
at very high agitation intensities with this attachment.

VX 10 retaining clamp attachment
This attachment is suitable for receiving 10 measuring flasks
(25ml) or similar containers. The stops must be fastened in place
on the measuring flasks.

Construction in accordance with the foolwing safety standards
IEC 61 010-1
UL 3101-1

CAN/CSA C22.2 (1010-1)

Associated standards and regulations

VXR 09.05.2001 10:42 Uhr Seite 10

Advertising