Eppendorf Mastercycler nexus - Manual (Page 15)

Product description
Mastercycler ® nexus
English (EN)
15
2.1.5 Terminal block
Abb. 2-5: Terminal block
Fig. 2-5: Terminal block
Only connect devices to the interfaces of the Mastercycler nexus that comply with the IEC 950/EN 60950
(UL 1950) standards.
1 CAN in port
Connection to an eco device.
2 CAN out port
Connection to a second eco device.
3 Eco switch
Adjusts the position of eco device (left or right
next to a master variant with control panel).
4 Term switch
Termination of the CAN data connection if
connected to the eco device.
5 Ethernet port (not in the case of an eco device)
Connection of a master variant of the
Mastercycler nexus to an Ethernet network.
1 2 3 4 5