3 setting up syslog messages, Setting up syslog messages – Eppendorf Mastercycler nexus User Manual
Page 82
System management
Mastercycler
®
nexus
English (EN)
82
4. Select the data you would like to send and their file type.
•
Cycler run protocol:
Protocol of the program run
•
Error log file:
Log file with errors that occurred during the program run
•
Self test certificate:
Self test certificate of a successful self test
5. Press the
OK
softkey to accept the settings.
8.7.3
Setting up syslog messages
Prerequisites
• Network connection has been set up (see p. 80)
• Logged in as an administrator (see p. 37)
Proceed as follows:
1. Select the
System
>
Network Settings
node.
2. Press the
Syslog
softkey.
The
Syslog Settings
window appears.
3. To activate log files on the syslog server, check the
Enable logging to Syslog server
checkbox. Enter the
server address and the port.
Press the
Test
softkey to send a test e-mail.