Eppendorf Eporator - Manual (Page 19)

Operation
Eppendorf Eporator®
English (EN)
19
5.6 Programs
A program contains a saved voltage setting for quick access to frequently used settings.
5.6.1 Loading program
The programs 1 and 2 are stored with the following parameters at delivery:
• Program key P1: 1 700 V
(e.g. for E. coli electroporation in 1 mm electroporation cuvettes)
• Program key P2: 2 500 V
(e.g. for E. coli electroporation in 2 mm electroporation cuvettes)

Press desired program key
The control LED above the pressed program key illuminates blue, the voltage is
displayed.
5.6.2 Saving program
1. Use the arrow keys to set the voltage.
2. Hold down the desired program key for at least 2 seconds.
A signal tone sounds. Voltage stored appears in the display. The control LED
over the pressed program key illuminates blue. The voltage is saved under
the corresponding program number (1 to 2).
P1
P2