2 inserting the o-rings and the sealing washer, 1 replacing the o-ring, Inserting the o-rings and the sealing washer – Eppendorf FemtoJet 4x v.2 User Manual
Page 44: Replacing the o-ring
Advertising

Maintenance
FemtoJet
®
4x
English (EN)
44
8.1.2
Inserting the o-rings and the sealing washer
8.2
Replacing the sealing in the adapter for Femtotips
You must replace any leaky sealings.
8.2.1
Replacing the o-ring
The sealing washer has two sides. The concave side must point to the o-ring.
1. Insert the first o-ring.
2. Press the o-ring down with the universal
capillary holder.
3. Insert the second o-ring and press it
down.
4. Insert the sealing washer and press it on
the o-ring.
1
O-ring
2
Adapter
3
Removal tool
1. Remove the Femtotips by turning them.
2. Extract the o-ring with the removal tool.
3
1
2
Advertising