Eppendorf Easypet - Manual (Page 13)

Eppendorf Easypet® — Operating manual
14
5.3 Dispensing liquid
Flow-out
During flow-out, a valve is opened. In this mode,
liquid dispensing takes place without activating
the pump, only using atmospheric pressure.
1. Place the pipette against the wall of the
vessel.
2. Press the dispensing button down to 5 mm.
Vary the pressure in order to change the
dispensing speed.
Abb. 5:Dispense liquid
Fig. 5: Dispense liquid
Blow-out
During blow-out, liquid is dispensed with the aid
of the pump.
1. In this mode, the dispensing speed can be
continuously adjusted using the adjustment
dial.
2. Place the pipette against the wall of the
vessel.
3. Press in the dispensing button completely.
Easypet