Eppendorf ThermoMixer C - Manual (Page 27)

Operation
Eppendorf ThermoMixer ® C
English (EN)
27
5.7.4 Interrupting the mixing process
If you want to add reagents or exchange tubes while mixing, you can interrupt the mixing
process. The temperature control continues to run during the pause.
1. In order to interrupt the mixing process, keep the start/stop key pressed for 2 s.
• The display shows Pause .
• The mixing process is interrupted.
• Time counting is stopped.
• Temperature control is continued.
2. In order to continue the mixing process, press the start/stop key.
5.7.5 Short Mix
Use the Short Mix function for mixing for a short while without temperature control.
1. Set the mixing frequency by means of the speed arrow keys.
2. Keep the short key pressed.
The mixing process continues as long as the short key will be pressed.
3. In order to end Short Mix, release the short key.
5.7.6 Mixing/tempering with Time Control or Temp Control
You can specify when time counting should begin:
• Time counting and mixing process begin immediately: Time Control
• Time counting and mixing process begin when the set temperature has been reached:
Temp Control
1. Under Menu , select the Time Mode menu item.
2. Use the menu arrow keys to select Time Control or Temp Control .
A tick indicates the selected setting.
3. To exit the menu, press the left ◄ menu arrow key twice.