Eppendorf ThermoMixer C - Manual (Page 39)

Maintenance
Eppendorf ThermoMixer ® C
English (EN)
39
Auxiliary equipment
• Lint-free cloth
• Mild, soap-based lab cleaner
• Dist. water
Cleaning the ThermoMixer C
1. Switch off the ThermoMixer C and disconnect it from the power supply.
2. Allow the device to cool down.
3. Clean all of the outer parts of the ThermoMixer C with a mild soap solution and a
lint-free cloth.
4. Wipe off the soap solution with dist. water.
5. Dry all cleaned parts.
7.2.1 Cleaning the thermoblock
Auxiliary equipment
• Lint-free cloth
• Mild, soap-based lab cleaner
• Dist. water
Clean the thermoblock immediately if sample fluid enters the bore holes or comes into
contact with the surfaces.
1. Clean with a mild soap solution.
2. Wipe off the soap solution with dist. water.
3. Dry the cleaned thermoblock.