Eppendorf ThermoMixer FP - Manual (Page 14)

14
Safety
Eppendorf ThermoMixer
® F0.5/F1.5/F2.0/FP
English (EN)
3.5 Danger symbols on the device
NOTICE! Damage to the display due to mechanical pressure.

Do not apply mechanical pressure to the display.
NOTICE! Damage from overheating.

Do not install the device near to any heat sources (e.g., heating, drying
cabinet).

Do not expose the device to direct sunlight.

Ensure unobstructed air circulation. Keep free a clearance of at least 10 cm
(3.9 in) around all ventilation grilles.
NOTICE! Damage to electronic components due to condensation.
Condensate can form in the device after it has been moved from a cool
environment to a warmer environment.

After installing the device, wait at least for 3 h. Only then connect the device
to the mains.
NOTICE! Damage from the use of aggressive chemicals.

Do not use any aggressive chemicals on the device or its accessories, such as
strong and weak bases, strong acids, acetone, formaldehyde, halogenated
hydrocarbons or phenol.

If the device has been contaminated by aggressive chemicals, immediately
clean it by means of a mild cleaning agent.
Representation Meaning Location
Risk of burns from hot surfaces. Upper device
side

Observe the operating manual. Rear of the
device
Caution! Risk of injury from moving
parts.

Observe the operating manual.
On the
thermoblock