Eppendorf ThermoMixer FP - Manual (Page 15)

Eppendorf ThermoMixer F1.5/FP — Operating manual
15
Abb. 4:Display ThermoMixer F1.5/ThermoMixer FP
Fig. 4: Display ThermoMixer F1.5/ThermoMixer FP
1 Device status
Device is performing mixing/temperature
control.
2 ThermoTop
ThermoTop has been attached.
To prevent the formation of condensate, the
device heats up the ThermoTop, before the
temperature of the thermoblock is
controlled.
3 Speaker
Speaker switched on.
Speaker switched off.
4 Key lock
Key lock activated: Parameters cannot be
changed.
No key lock.
5 Mixing frequency 6 Actual temperature
When the actual temperature flashes on
the display, the device is not in temperature
control mode operation.
7 Set temperature
When the set temperature has been
reached, only one value is displayed.
EN
Operating manual