Eppendorf S41i Incubator Shaker - Manual (Page 59)

59
S41i CO2 Incubator Shaker — Operating manual
Your options are to press the REDO button to begin the procedure again or to press the
DONE button to return to the SET CO2 AUTOZERO screen.
 Press the OK button to return to the MENU.
5.6.6 DISINFECTION screen
Abb. 28: Disinfection button
Fig. 28: Disinfection button
 To run the High Temperature Disinfection program, press the Disinfection button.
 In the screen that opens:
NOTICE!
Risk of equipment damage
 Always remove the O
2
sensor, if present, prior to running the Disinfection program. Failure to
remove the sensor will result in its destruction by the high temperature.
5
Op
er
at
ion