Eppendorf 2350 Biological Shakers Innova - Manual (Page 17)

Installation
New Brunswick ™ Innova ® 2300/2350 Shakers
English (EN)
17
4 Installation
4.1 Unpacking
Upon unpacking the unit, inspect it carefully for any apparent damage that may have occurred during
transit. Immediately report any damage to the carrier and to the Eppendorf Service Department. Do not
discard the crate or packing material.
4.2 Checking voltage configuration
Do not plug your shaker into the power source until you determine that voltage of your unit matches your
electrical service. This can be determined by checking the voltage indicator and label on the rear of the
unit.
4.3 Space requirements
It is essential that the unit be situated in an area where there is sufficient space for the shaker and platform
to clear walls and other potential obstructions during operation.
The dimensions, including a platform but excluding glassware, are:
The effective surface area required for operation is:
VERY IMPORTANT: There are 2 small plastic straps that hold the bearing housing in place for
shipping. Be sure to remove these 2 straps before operation.
WARNING! Risk of electric shock and/or damage to device!
 Do not plug the shaker into a power source until you check the voltage and frequency
settings.
Model Width Depth Height
Innova 2300 without capacity upgrade 74 cm (29 in) 56.5 cm (22 1/4 in) 17 cm (6 3/8 in)
Innova 2350, Innova 2300 with capacity
upgrade 91 cm (36 in) 61 cm (24 in) 17 cm (6 3/8 in)
Model Width Depth
Innova 2300 without capacity upgrade 81 cm (32 in) 64 inch (25 in)
Innova 2350, Innova 2300 with capacity upgrade 99 cm (39 in) 68.5 inch (27 in)