2 hose connections – Eppendorf 3100 Digital Water Bath Shake User Manual
Page 18

12
Inches
Centimeters
Width
19½
43.2
Depth
27½
69.9
Height
17
36.8
The effective surface area required for operation is:
Inches
Centimeters
Width
21½
48.3
Depth
30
76.2
3.3.2
Hose Connections
A ½ inch diameter reinforced hose is provided for water addition and drainage.
Cut the hose into two lengths, to suit the distances from the water source to the
machine.
Install the hosing as follows, using Figure 6 on following page for reference:
1. Connect one length of ½ inch hose to the WATER IN FITTING.
2. Connect the other length of ½ inch hose to the DRAIN FITTING.
3. Clamp the hoses with the clamps provided.
4. Connect the “WATER IN” hose to a water supply with a maximum water
pressure of 100 psi. The drain hose must go to an OPEN drain.
5. Attach the smaller diameter (3/8 inch) hose to the overflow tube, and run it
to an OPEN drain.