Eppendorf New Brunswick RPC Controller - Manual (Page 3)

3
RPC Controller to External Device — Instructions for use
1 Connect New Brunswick™ RPC controller to iPad
1 New Brunswick™ RPC controller to iPad
Prerequisites
• Wireless router
• iPad
• Mocha VNC Lite App (available from the App Store), requires internet access
1.0.1 Connect wireless router
1. Plug wireless router to the mains/power supply.
2. Connect New Brunswick™ system’s Ethernet port to wireless router.
3. Navigate to the Hardware Setup tab on the Setup screen of the New Brunswick System, and
record the IP Address.
Hint!
This will be a wired connection.
1 Ethernet port
1 Record IP address
Hint!
If ‘TCPIP Parameters‘ block is greyed out and/or the fields are empty, (see Troubleshooting on
p. 12).
It may take a few minutes to refresh the IP address on the system.
1
New Brunswick™
RPC controller to iPad