Eppendorf Micromanipulators - Manual (Page 2)

Your local distributor: www.eppendorf.com/worldwide
Eppendorf AG · Germany · Tel. +49 40 538 01-0 · E-Mail: [email protected]
Eppendorf North America, Inc. · USA · Toll free phone 800 645 3050 · E-Mail: [email protected]
Application Support
Europe, International: [email protected] ·· North America: [email protected]
Asia, Pacific: [email protected]
In touch with life
eppendorf is a r
egister
ed trademark.
5181 250.900-02/1105
· Printed in Germany
Universal Stand for mounting Eppendorf Micromanipulators
In addition to the safety precautions contained in the operating manual for the
micromanipulator, it is essential to observe the following:
– Before assembling the motor module, please ensure that the Universal stand is positioned
securely and that maximum stability is guaranteed!
– If an impulse of sufficient strength is applied, the levering arm of the Universal Stand cause
the module construction to tip over!
– Do not disassemble the module construction by simply loosening the magnet! If the feet of
the magnet are in the "Loose" position, the entire module construction may tip over!
– The Universal Stand is fitted with a powerful magnet. During Assembly/disassembly, this
could be problematic for persons wearing a pacemaker! In addition, other magnetic storage
media (e.g. credit cards, floppy disks) or magnetized objects (e.g. mechanical watches) may
cause problems when near the Universal Stand!
– Loosing the screws to the clamping plate when the module construction is altered or
adjusted may cause the module unit to slip downwards suddenly. This may cause serious
injury!
– Avoid vibrations when altering or aligning the module construction as this may damage the
motor module!
Article Order no. Order no. for
international North America
Universal Stand 5181 250.005 920008631
for mounting Eppendorf Micromanipulators
Spacer (41 mm) 5181 255.007 920008666
Safety precautions
Ordering information