JLG 80HX_HX+6 ANSI Operator Manual - Manual (Page 36)

SECTION 2 - PREPARATION AND INSPECTION
2-16 – JLG Lift – 3120270
36 Extend-A-Reach - Boom
End (If Equipped) 2 Grease Fittings A/R MPG X
37 Extend-A-Reach -
Platform End (if
Equipped) 1 Grease Fitting A/R MPG X
38 Extend-A-Reach - Slave
Cylinder Rod End (If
Equipped) 1 Grease Fittings A/R MPG X
39 Extend-A-Reach Link -
Slave Cylinder Pivot
Point (If Equipped) 1 Grease Fitting A/R MPG X
40 Extend-A-Reach Link -
Slave Cylinder Pivot
Point (If Equipped) 1 Grease Fitting A/R MPG X
NOTES: KEY TO LUBRICANTS
Lubrication intervals are based on machine operation under normal conditions. For machines used in multi shift operations and/or exposed to hostile envi-
ronments or conditions, lubrication frequencies must be increased accordingly. EO
EPGL
HO
MPG
Engine Oil
Extreme Pressure Gear Lube
Hydraulic Fluid (Mobil #424 or equivalent)
Multi-Purpose Grease
Table 2-1. Lubrication Chart
Components
Number/Type
Lube Points
Capacity Lube
Interval Hours
Comments
3 Months
150 hrs
6 Months
300 hrs
1 Year
600 hrs
2 Years
1200 hrs