JLG M4069 Operator Manual - Manual (Page 28)

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION AND INSPECTION
2-6 – JLG Lift – 3121638
e. Ensure that all LED’s in the control box are work-
ing properly.
f. Check that the platform extension extends and
retracts properly.
3. With the platform in the stowed position:
a. Drive the machine on a grade, not to exceed the
rated gradeability, and stop to ensure the brakes
hold.
b. The red warning LED on the control panel indi-
cates the chassis is on a slope beyond the rated
limit from side to side and/or front to rear when
the platform is in the stowed position.
NOTE: When the limits are exceeded, drive and lift-up functions
are cutout.
Table 2-2. Drive Limits
Model
High Drive
Cutout
Drive Cutout
Drive at Creep
Speed
3369LE/M3369 Above Stowed N/A N/A
4069LE/M4069 Above Stowed 30 ft (9.1 m) N/A
M4069 (AUS Full Drive
Height Model)
Above Stowed N/A
28 ft - 30 ft
(8.5 m - 9.1 m)
Table 2-3. Tilt vs. Height
Height
Tilt
Left - Right Front - Back
3369LE/M3369 (ANSI/CE/Australia/Japan)
< 25 ft (7.6 m) 5° 5°
< 30 ft (9.1 m) 4° 5°
Full Height 3° 5°
3369LE/M3369 (CSA)
Full Height 3° 3°
3369LE/M3369 (CE) - 37 mph (16.7 m/s) wind-speed option
< 25 ft (7.6 m) 4° 5°
Full Height 2° 4°
4069LE/M4069 (ANSI/CE/Australia/Japan)
< 30 ft (9.1 m) 5° 5°
< 36 ft (11 m) 4° 5°
Full Height 3° 5°
4069LE/M4069 (CSA)
Full Height 3° 3°