JLG 120-SXJ ANSI Operator Manual - Manual (Page 52)

SECTION 4 - MACHINE OPERATION
4-2 – JLG Lift – 3121104
4.2 OPERATING CHARACTERISTICS AND
LIMITATIONS
General
A thorough knowledge of the operating characteristics
and limitations of the machine is always the first require-
ment for any operator, regardless of the user’s experience
with similar types of equipment.
Placards
Important points to remember during operation are pro-
vided at the control stations by DANGER, WARNING,
CAUTION, IMPORTANT and INSTRUCTION placards. This
information is placed at various locations for the express
purpose of alerting personnel of potential hazards consti-
tuted by the operating characteristics and load limitations
of the machine. See FOREWORD for definitions of the
above placards.
Capacities
Raising the boom above horizontal and/or the extension
of the boom beyond the retracted position with or without
any load in the platform, is based on the following criteria:
1. Machine is positioned on a smooth, firm and level
surface.
2. Load is within manufacturer’s rated design capacity.
3. All machine systems are functioning properly.
4. Machine is as originally equipped from JLG.
Stability
This machine as originally manufactured by JLG Indus-
tries Inc., when operated within its rated capacity on a
smooth, firm and level supporting surface, and in accor-
dance with the instructions provided on the machine and
this manual, provides a stable machine for all platform
positions.
Machine stability is based on two positions which are
called FORWARD STABILITY and BACKWARD STABILITY.
The machines position of least forward stability is shown
in Figure 4-1. and its position of least backward stability is
shown in Figure 4-2.
Table 4-1. Operating Specifications - 100SX, 110SX &
110SXJ
Maximum Work Load (Capacity)
Restricted (110SX Only):
Unrestricted:
1000 lb (455 kg)
500 lb (230 kg)
Maximum Travel Grade (Gradeablility 45%
Maximum Travel Grade (Side Slope) 5°
Max Vertical Platform Height, 100SX: 100 ft. (30.5 m)
Max Vertical Platform Height
110SX, 110SXJ: 110 ft. (33.5 m)
Maximum Horizontal Platform Reach 60 ft. (18.3 m)
Turning Radius (inside) - 4WS
Axles Retracted
Axles Extended
9.5 ft. (2.9 m)
9.8 ft. (3.0 m)
Turning Radius (Outside) - 4WS
Axles Retracted
Axles Extended
17.5 ft.(5.3 m)
20 ft. (6.1 m)
Maximum Tire Load: Reference Decal on Machine
Max Ground Bearing Pressure:
90 psi (6.3 kg/cm
2
)
Maximum Drive Speed: 3 mph (4.8 km/h)
Drive Speed - Creep 0.4 mph (0.64 kph)
Gross Machine Weight (approx.)
100SX
110SX
110SXJ
37,700 lb. (17,136 kg)
41,900 lb. (19,006 kg)
41,800 lb. (18,960 kg)
Table 4-2. Operating Specifications - 120SXJ
Maximum Work Load (Capacity) 500 lb (230 kg)
Maximum Travel Grade (Gradeablility) 45%
Maximum Travel Grade (Side Slope) 5°
Maximum Vertical Platform Height: 120 ft. (36.6 m)
Maximum Horizontal Platform Reach 60 ft. (18.3 m)
Turning Radius (inside)
Axles Retracted
Axles Extended
19 ft. (5.79 m)
19.5 ft. (5.92 m)
Turning Radius (Outside)
Axles Retracted
Axles Extended
35 ft.(10.67 m)
40 ft. (12.19 m)
Maximum Tire Load: Reference Decal on Machine
Maximum Drive Speed: 3 mph (4.8 km/h)
Drive Speed - Creep 0.4 mph (0.64 kph)
Gross Machine Weight (approx.) 43,500 lb. (19,732 kg)