Document Outline

• FOREWORD
• Section 1. SAFETY PRECAUTIONS
  • 1.1 General
  • 1.2 Pre-Operation
    • Operator Training and Knowledge
    • Workplace Inspection
    • Machine Inspection
  • 1.3 Operation
    • General
    • Trip and Fall Hazards
    • Electrocution Hazards
    • Tipping Hazards
    • Crushing and Collision Hazards
  • 1.4 Towing, Lifting, and Hauling
  • 1.5 Maintenance
    • General
    • Maintenance Hazards
    • Battery Hazards
• Section 2. preparation and inspection
  • 2.1 General
  • 2.2 Preparation For Use
  • 2.3 Delivery and Frequent Inspection
    • Chassis
    • Turntable
    • Boom
    • Extend-A-Reach (If Equipped)
    • Platform
    • Torque Requirements
  • 2.4 Daily Walk-Around Inspection
  • 2.5 Daily Functional Check
    • Load Management System Daily Check
  • 2.6 Torque Requirements
  • 2.7 Battery Maintenance
    • Battery Maintenance
• Section 3. User responsibilities and machine control
  • 3.1 General
  • 3.2 Personnel Training
    • Operator Training
    • Training Supervision
    • Operator Responsibility
  • 3.3 Controls and Indicators
    • Ground Controls
    • Remote Control Box (120SXJ Only)
    • Platform Station
  • 3.4 Placards and Decals
• Section 4. Machine Operation
  • 4.1 Description
  • 4.2 Operating Characteristics and Limitations
    • General
    • Placards
    • Capacities
    • Stability
  • 4.3 General
  • 4.4 Engine Operation
    • Starting Procedure
    • Shutdown Procedure
  • 4.5 Traveling (Driving)
    • Traveling Forward or Reverse
  • 4.6 Steering
  • 4.7 Parking and Stowing
  • 4.8 Platform
    • Loading From Ground Level
    • Loading From Positions Above Ground Level
    • Platform Level Adjustment
    • Platform Rotation
  • 4.9 Axles, Extending and Retracting
    • Machines without Jacks
    • Machines with Jacks
  • 4.10 Axles, Extending and Retracting w/Remote Control Box
  • 4.11 Boom
    • Swinging the Boom
    • Raising and Lowering the Main Boom
    • Telescoping the Main Boom
  • 4.12 Shut Down and Park
  • 4.13 Tie Down and Lifting
  • 4.14 Steer/tow Selector (If Equipped)
  • 4.15 Towing (If Equipped)
    • Prior to towing the machine, complete the following:
    • After towing the machine, complete the following:
  • 4.16 Swing-Away Jib (120SXJ Only)
    • To Erect the Jib
    • To Stow the Jib
• Section 5. OPTIONAL EQUIPMENT
  • 5.1 Dual Fuel System (Gas Engine Only)
    • Description
    • Changing From Gasoline to LP Gas
    • Changing From LP Gas to Gasoline
  • 5.2 Motion Alarm
  • 5.3 Electric Generator
  • 5.4 Strobe Light
  • 5.5 Cylinder Bellows
  • 5.6 Boom Wipers
  • 5.7 110 Volt/60Hz Generator
  • 5.8 220 Volt Receptacle
  • 5.9 Spark Arrestor Muffler
  • 5.10 110 Volt Receptacle
• Section 6. emergency procedures
  • 6.1 General
  • 6.2 Emergency Towing Procedures
  • 6.3 Emergency Controls and Their Locations
    • Emergency Stop Switches
    • Ground Control Station
    • Auxiliary Power
  • 6.4 Emergency Operation
    • Use of Ground Controls
    • Operator Unable to Control Machine
    • Platform or Boom Caught Overhead
    • Righting a Tipped Machine
    • Post Incident Inspection and Repair
  • 6.5 Incident Notification
• Section 7. INSPECTION AND REPAIR LOG