JLG 266 Parts Manual - Manual (Page 201)

HYDRAULIC CIRCUITS
3126025 266, 307, 266 LoPro, 26.6, 30.7, 26.6 LP 8-27
Figure 8-8 Tilt & Tilt Compensating Cylinderr
Item Part Number Qty. Description Rev.
4 0700817 1 HEX HD CAPSCREW, 8-1.25X45mm
51 2142733 2 CONNECTOR
105 Ref MAIN CONTROL VALVE, (see Figure 9-6 for details)
122 1309435 1 COVER PLATE
123 1321086 1 CLAMP
125 2142216 2 SWIVEL NUT RUN TEE
126 2143017 2 ELBOW, 90 DEGREES
129 2754308 1 HOSE ASSY
130 2754310 1 HOSE ASSY
201 0700815 5 HEX HD CAPSCREW, 8-1.25X35mm
202 0700818 1 HEX HD CAPSCREW, 8-1.25X50mm
211 874960 5 COVER PLATE
212 1309435 1 COVER PLATE
213 1317515 1 CLAMP
214 1321128 7 CLAMP
215 1321133 2 STACKING BOLT
216 1321134 2 CLAMP LOCKING PLATE
217 Ref TILT CYLINDER, (see Figure 9-3 for details)
219 2140118 6 DUAL NUT
220 2141621 4 CONNECTOR
221 2143017 2 ELBOW, 90 DEGREES
225 2754111 2 HOSE ASSY
226 2754120 1 HOSE ASSY
243 4568870 1 TUBE ASSY
244 4569029 1 TUBE ASSY
245 4569036 1 TUBE ASSY
248 4569042 1 TUBE ASSY
312 Ref COMPENSATION CYLINDER, (see Figure 9-4 for details)
408 1001101935 2 ELBOW, 45 DEGREES, (AUS - if equipped with LMIS)
415 1001101807 2 ADAPTER, (AUS - if equipped with LMIS)
418 1001101954 2 PRESSURE SENSOR, (AUS - if equipped with LMIS)
NOTE: ITEM NUMBERS NOT LISTED ARE NOT USED ON THIS FIGURE