JLG 266 Parts Manual - Manual (Page 35)

BOOM
3126025 266, 307, 266 LoPro, 26.6, 30.7, 26.6 LP 2-9
Figure 2-2 Second Boom Section
Item Part Number Qty. Description Rev.
1 0801415 1 SECOND BOOM SECTION, (307)
0801415B 1 SECOND BOOM SECTION, (30.7)
2 2160018 1
LUBE FITTING, 90 DEGREES
3 4100078 2
BUSHING
4 3574798 1
FRONT COVER PLATE, (307)
3574798B 1
FRONT COVER PLATE, (30.7)
5 0760808 6 HEX HD CAPSCREW, 8-1.25X16mm, GR8.8
6 4811900 6 LOCKWASHER, 8mm
7 3423149 1 CROWD CYLINDER PIN
8 3760492 2 RETAINING RING
9 4340829 1 BRACKET
10 4340828 1
BRACKET
11 0761012 10
HEX HD CAPSCREW, 10-1.50X25mm, (torque to 50 Nm)
12 4812000 18
FLAT WASHER, 10mm
13 Ref
CROWD CYLINDER, (see Figure 9-2 for details)
14 3423075 1 CROWD BARREL PIN
15 3760491 2 RETAINING RING
16 8002199 2 BEARING PAD
17 8003242 2 SPACER
18 8008069 AR SHIM, OFFSET, 70X200X2.0
8008634 AR SHIM, OFFSET, 70X200X0.5
8008644 AR
SHIM, OFFSET, 70X200X1.0
8008645 AR
SHIM, OFFSET, 70X200X1.5
19 0761210 4
HEX HD CAPSCREW, 12-1.75X20mm, GR 8.8, (as required), (torque to 90 Nm)
0761212 4
HEX HD CAPSCREW, 12-1.75X25mm, GR 8.8, (as required), (torque to 90 Nm)
0761214 4 HEX HD CAPSCREW, 12-1.75X30mm, GR 8.8, (as required), (torque to 90 Nm)
20 4812100 4 FLAT WASHER, 12mm
21 8002200 4 BEARING PAD
22 0761010 8 HEX HD CAPSCREW, 10-1.50X20mm, GR 8.8, (as required), (torque to 50 Nm)
0761012 8 HEX HD CAPSCREW, 10-1.50X25mm, GR 8.8, (as required), (torque to 50 Nm)
0761014 8
HEX HD CAPSCREW, 10-1.50X30mm, GR 8.8, (as required), (torque to 50 Nm)
23 8002901 4
SPACER
24 4700026 1
SLIDER PAD
25 8008640 AR
SHIM, 50X200X0.5
8008641 AR SHIM, 50X200X1.0
8008642 AR SHIM, 50X200X1.5
8008070 AR SHIM, 50X200X2.0