JLG 110HX Parts Manual - Manual (Page 144)

3-12 3120801
SECTION 3 BOOM
S
E
C
T
I
O
N
3
B
O
O
M
224E cont’d Use 7006138 Pin Assembly (Includes 1 link pin, 1 retain-
ing ring & 4 washers of various thicknesses)
(was p/n 7006180) A/R
7016520 Rod W/Roll Pin (1180236 Power Track
Only) 1
7016531 Clamping Carrier Assembly (Includes 2 link
pins, 1 clamping carrier, 1 clamping
stiffener, 1 bolt, 1 nut & 1 lockwasher)
(1180236 Power Track Only) 1
7006165 Kit, Rod Carrier (Includes 1 rod, 1 sleeve &
2 screws) (1180236 Power Track Only) 1
225 Cover, Boom End Options: 1
4843087 4620044 Turntable Machines
4843107 4620078 Turntable Machines
226 Shield, Hose and Cable (Right Side) Options: 2
4060568 100HX & 110HX with 4620038 & 4620044
Turntable
4060685 100HX+10 & 110HXER with 4620038 & 4620044
Turntable
4060685 4620078 Turntable Machines
227 Shield, Hose and Cable (Right Side) Options: 1
4060673 100HX & 110HX with 4620038 & 4620044
Turntable
4060684 100HX+10 & 110HXER with 4620038 & 4620044
Turntable
4060684 4620078 Turntable Machines
228 Plate, Ramp (Left Side) Options: 1
3532841 4620038 & 4620044 Turntable Machines
3536001 4620078 Turntable Machines
229 Rod, Hose Retainer (Right Side) Options: A/R
Not Required 100HX, 100HX+10 & 110HXER 0
3840975 110HX with 4620038 & 4620044 Turntable 1
Not Required 110HX with 4620078 Turntable 0
230 Cover Options: A/R
Not Required 4620038 & 4620044 Turntable Machines 0
1670321 4620078 Turntable Machines 1
231 Shim Options: A/R
4070498 4620038 & 4620044 Turntable Machines A/R
Not Required 4620078 Turntable Machines 0
232 Chain Options: 1
1260254 100HX
1260242 110HX Built Prior To Early 1990
1260254 110HX Built Early 1990 To Present
1260242 100HX+10 &110HXER Built Prior To Early 1990
1260254 100HX+10 &110HXER Built Early 1990 To Present
233 Clevis Options: 1
1360218 110HX Built Prior To Early 1990
1360234 110HX Built Early 1990 To Present
FIGURE 3-1. BOOM ASSEMBLY COMPONENTS INSTALLATION (CONTINUED)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.