JLG 110HX Parts Manual - Manual (Page 168)

4-4 3120801
SECTION 4 PLATFORMS
S
E
C
T
I
O
N
4
P
L
A
T
F
O
R
M
S
0235238 ROTATOR ASSEMBLY Ref. E
Note: For Machines Built Prior to September 1991
refer to Service Information Bulletin #91-5 for
required upgrade.
101 3160083
Rotator Motor Assembly (See Figure 4-4 for Break-
down)
1
102 0080099 Adapter, Motor 1
103 2760064 Housing, Gear 1
104 0440134 Bearing, Sleeve 2
105 4740199 Washer, Thrust 4
106 0440120 Bearing, Thrust 2
107 2440043 Gear, Worm 1
108 3440816 Rollpin 1/4" x 1" 4
109 0080098 Adapter, Motor to Worm Gear 1
110 2440044 Gear, Worm 1
111 4740256 Washer, Thrust 2
112 0440135 Bearing, Sleeve 1
113 1760068 Disc, Brake 1
114 Not Used
115 3931010 Bolt, Socket Head #10-24NC x 5/8" 5
116 3441228 Rollpin 3/8" x 1 3/4" 2
117 3931620 Bolt, Socket Head 3/8"-16NC x 1 1/4" 2
118 4761600 Lockwasher 3/8" 6
119 3931612 Bolt, Socket Head 3/8"-16NC x 3/4" 4
120 4070585 Shim.010 A/R
121 4070586 Shim.005 A/R
122 4070587 Shim.002 A/R
123 0100019 Loctite #271 (Not Shown) A/R
124 0100021 Primer (Not Shown) A/R
125 2160001 Fitting, Grease - 90° (Not Shown) 1
126 3020025 Grease (Not Shown) A/R
PLATFORM WELDMENTS Ref.
201 Platform Options (Includes Items 301-307): 1
3’ x 5’ (91.5cm x 152.5cm)
3510301 Platform with Kickplates & Self-Closing Gate
3’ x 6’ (91.5cm x 183cm)
3510294 Platform without Kickplates
3510302 Platform with Kickplates & Self-Closing Gate
3’ x 8’ (91.5cm x 244cm)
3510295 Platform without Kickplates
3510303 Platform with Kickplates & Self-Closing Gate
FIGURE 4-1. PLATFORM COMPONENTS INSTALLATION - 100HX/110HX (CONTINUED)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.