JLG 4017 Operator Manual - Manual (Page 60)

Section 3 - Operation
3-4 3121857
Normal Engine Operation
• Observe gauges and display screen frequently to be sure all engine systems are
functioning properly.
• Be alert for unusual noises or vibration. When an unusual condition is
noticed, park machine in safe position and perform shut-down procedure. See
“Shut-Down Procedure” on page 3-4. Report condition to your supervisor or
maintenance personnel.
• Avoid prolonged idling. If the engine is not being used, turn it off.
Shut-Down Procedure
When parking the telehandler, park in a safe location on flat level ground and away
from other equipment and/or traffic lanes.
1. Apply the park brake.
2. Shift the transmission to “Neutral.”
3. Lower forks or attachment to the ground.
4. Operate engine at low idle for 3 to 5 minutes. DO NOT over rev engine.
5. Shut off engine and remove ignition key.
6. Exit telehandler properly.
7. Turn off electrical master switch (if equipped).
8. Block wheels (if necessary).