JLG 1350SJP Parts Manual - Manual (Page 176)

2-116 1200SJP 1350SJP 3121208
SECTION 2 TURNTABLE
104 1 Bracket Options:
0902760 Prior to SN 0300086626
0903161 SN 0300086626 to Present
105 0902761 1 Bracket
106 1 Hood - Front Options:
Ref Note: When installing a replacement hood, heat shields
(items 114 & 115) must be installed on the replacement
hood before being place in service. Only p/n 1001097956
hood includes the heat shield insulation. For all other
hoods, heat shield must be purchased separately.
1001097956 Machines with Caterpillar, Deutz BF4M20111 & Deutz
TD2011 Engines (Includes Items 13, 25, 114 & 115)
1001142021 Machines with Deutz TCD2.9L4 Engines
107 2680496 1 Hood - Rear
108 1 Hardware Options:
Use 7027859 Latch (was p/n 2940124) (Prior to SN 0300086626)
2560187 Handle, Push Button (SN 0300086626 to Present)
109 3311501 10 Nut 5/16in-18NC
110 3340877 9 Pad
111 3960464 12ft/3.7m Seal, Hood
112 4060806 49in/1.3m Flex-Trim
113 4751500 20 Flatwasher 5/16in Regular
114 1 Insulation Options:
2820145 Machines with Caterpillar, Deutz BF4M2011 & Deutz TD2011
Engines
1001152566 Machines with Deutz TCD2.9L4 Engines
1001117140 AR Tape, Aluminized
115 1 Insulation Options:
2820146 Machines with Caterpillar, Deutz BF4M2011 & Deutz TD2011
Engines
1001152566 Machines with Deutz TCD2.9L4 Engines
1001117140 AR Tape, Aluminized
116 4060804 61in/1.6m Flex-Trim
117 0100081 AR Adhesive (Not Shown)
118 0902874 1 Pawl, Latch (Prior to SN 0300086626)
119 0760608 1 Screw M6 x 16mm (SN 0300086626 to Present)
120 3290601 1 Nut M6 (SN 0300086626 to Present)
121 3575782 1 Plate, Handle Backing (SN 0300086626 to Present)
122 3900363 2 Screw M6 x 1x25mm (SN 0300086626 to Present)
123 4811900 2 Flatwasher M8 (SN 0300086626 to Present)
Ref TANK SIDE HOOD ASSEMBLIES (ABS)
2680500 Ref Prior to SN 0300086626 E
1671194 Ref SN 0300086626 to Present A
201 0100011 AR Compound, Locking
202 0641506 9 Bolt 5/16in-18NC x 3/4in
203 0902746 4 Bracket
204 0902762 1 Bracket
205 0902763 1 Bracket
FIGURE 2-22. HOOD INSTALLATION (ABS) (CONTINUED)
ITEM # PART NUMBER QTY. DESCRIPTION REV.