JLG 1350SJP Parts Manual - Manual (Page 251)

3121208 1200SJP 1350SJP 4-3
SECTION 4 PLATFORM
FIGURE 4-1. PLATFORM COMPONENTS INSTALLATION
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref PLATFORM ASSEMBLIES:
Ref 8ft (2.44m) with No Mesh
Use 1001144023 Ref Prior to SN 0300162808 (was p/n 3510822) J
1001144023 Ref SN 0300162808 to Present B
Ref 6ft (1.83m) with No Mesh
Use 1001144024 Ref Prior to SN 0300162808 (was p/n 3510833) I
1001144024 Ref SN 0300162808 to Present B
Ref 4ft (1.22m) with No Mesh
Use 1001144027 Ref Prior to SN 0300162808 (was p/n 3510830) M
1001144027 Ref SN 0300162808 to Present B
Ref Note: Platform and Mesh must be ordered separately for
Platforms with Mesh. See SPECIAL OPTIONS SECTION
for Mesh Installations.
Ref Note: Replacement decals must be ordered separately -
See DECAL SECTION.
Ref Note: When replacing 8ft/2.44m platform with Soft Touch
option, new Soft Touch Rail p/n 4846673 must be
purchased to accommodate limit switch locations.
Ref Note: When replacing platform on machines with
SkyCutter option, new bracket p/n 1001145405 must be
purchased to accommodate SkyCutter components.
1 0100040 AR Adhesive
2 2080040 16 Fastener, Huck
3 2600281 2 Hinge, Self-Closing
4 2940074 1 Latch
5 3311001 4 Nut #10-24NC (Prior to SN 0300077331)
6 See Note 1 Platform Weldment (Note: Not Available - Purchase
Platform Assembly)
7 1 Cap-Plug Options:
3520072 Prior to SN 0300162808
1001144630 SN 0300162808 to Present
8 4 Rivet Options:
Use 3820020 Prior to SN 0300077331 (was p/n 3800205)
3820020 SN 0300077331 to Present
9 4751000 8 Flatwasher #10 Regular (Prior to SN 0300077331)
10 1 Gate Weldment Options:
4846452 Prior to SN 0300162808
1001144629 SN 0300162808 to Present
11 3520198 2 Square Tube - Plug
12 Not Used
13 4761000 4 Lockwasher #10 (Not Shown) (Prior to SN 0300077331)