JLG 45HA ANSI Parts Manual - Manual (Page 299)

5-29
S
E
C
T
I
O
N
5
C
Y
L
I
N
D
E
R
S
SECTION 5 CYLINDER
FIGURE 5-14. CYLINDER BELLOWS INSTALLATION (OPTIONAL)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.
CYLINDER BELLOWS INSTALLATION (OPTIONAL) Ref.
0238887 2WD 6’-6”/2M Machines with Fixed Axle Ref. C
0238950 2WD 6’-6”/2M Machines with Oscillating Axle Ref. C
0239000 2WD 5’-9”/1.75M Machines with Fixed Axle Ref. C
0238889 2WD 5’-9”/1.75M Machines with Oscillating Axle Ref. C
0239000 4WD Machines with Fixed Axle Ref. C
0238999 4WD Machines with Oscillating Axle Ref. C
1 0460093 Bellows (With Zipper) (Tower Lift, Main Lift and Slave 3
Cylinders)
2 Not Used
3 0460084 Bellows (With Zipper) (Slave Cylinder) 1
4 Bellows (With Zipper) (Steer Cylinder) Options: 2
0460082 2WD 6’-6”/2M Machines
0460075 2WD 5’-9”/1.75M Machines
0460075 4WD Machines
5 Bellows (With Zipper) (Lockout Cylinder) A/R
Not Required Fixed Axle 0
0460083 Oscillating Axle 2
6 1320037 Clamp, Worm Gear (3"- 4 1/8” Dia.) (Oscillating Axle
Machines Only) 2
7 1320122 Clamp, Worm Gear (5 1/8”- 6" Dia.) 6