JLG 1850SJ Operator Manual - Manual (Page 117)

SECTION 5 - LCD DISPLAY PANEL
3121618 – JLG Lift – 5-17
5.14 SWING DTCS
When the machine is swung more than what it is allowed for in
either left or right direction, the control system senses a swing
fault. When this DTC is active, the display shows a machine image
with green arc which indicates the allowed angle and the portion
other than the green arc indicates the restricted area to show the
swing DTC. Displays shows operator to extend the axles by flash-
ing the axles.
• Swing DTC will be displayed on the DTC tray with the num-
ber and system distress icon.
• Available functions on the machine are shown with green
arrows. Functions that are not available are grayed out.
• RPM and speed restriction icon will be displayed in the
Icons tray.
NOTE: Image below shows a left swing DTC. For right swing DTC, the
boom will be shown swung to the right.