JLG 1850SJ Operator Manual - Manual (Page 123)

SECTION 5 - LCD DISPLAY PANEL
3121618 – JLG Lift – 5-23
Axles Retracted In Out of Transport Position
When the axles are retracted and the machine is in out of trans-
port position, the display will switch between axles extended and
retracted every 0.5 seconds to tell the operator to extend the
axles so the boom can be raised.
Axles In Transient State
When the operator is extending or retracting the axles, the Axles
In Transient State screen will show and the arrows showing axle
travel direction will flash. When the axles are not fully extended
or retracted and no axle functions are selected, the green arrows
will show steadily.
Figure 5-22. Axles In Transient State Screen