JLG 80HX_HX+6 Parts Manual - Manual (Page 183)

3120800 2-113
S
E
C
T
I
O
N
2
T
U
R
N
T
A
B
L
E
SECTION 2 TURNTABLE
0238777 HEATERS AND CONTROLS INSTALLATION Ref. D
301 1600043 Control, Thermoswitch 1
302 2580018 Heater, Immersion 2
303 0231756
Junction Box Assembly (See Items 401-403 for Break-
down)
2
304 3311401 Nut 1/4"-20NC 4
305 4761400 Lockwasher 4
306 4300031 Stud (Welded on Part) 4
307
3251836
Nameplate - Engine/Battery Manifold Heater (Left Box) 1
308 3251272 Nameplate - Hydraulic Oil Tank Heater (Right Box) 1
309 3251243 Nameplate - 120V-60Hz 2
0231756
JUNCTION BOX ASSEMBLY Ref. C
401 4460137 Receptacle, Female (1 Per Assembly) 1
4460082
Receptacle, Male (1 Per Assembly) 1
402
4460007
Strip, Terminal (1 Per Assembly) 1
403 4460049 Connector, Strain Relief (3 Per Assembly) 3
0255869
FUEL FILL EXTENSION KIT Ref. A
Note: For use on fuel tanks built prior to June 1995.
Tanks built June 1995 to present are already
equipped with extension.
501
4845158
Fill Tube Extension Weldment 1
502 3960465 Seal 1
FUEL CAP ASSEMBLY Ref.
0236285
Standard Non-Locking (Prior to June 1995) Ref. 5/E
0255823 Standard Non-Locking (June 1995 to S/N 30382) Ref. 2/B
0257365 Standard Non-Locking (S/N 30382 to Present) Ref. 1
0257366
Locking Protectoseal (Red) Ref. 2
0258626
Locking Protectoseal (Blue) Ref. 1
601 Cap, Fill Options: 1
1120314
Standard Non-Locking Cap
1120367
Locking Protectoseal (Red)
1120512 Locking Protectoseal (Blue)
FIGURE 2-28. TANKS INSTALLATION (CONTINUED)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.