JLG 80HX_HX+6 Parts Manual - Manual (Page 216)

3-8 3120800
SECTION 3 BOOM S
E
C
T
I
O
N
3
B
O
O
M
204 Not Used
205
0630347
Bolt 1/2"-13NC x 2 1/4" (Grade 8) 2
206 3450405 Pin, Cotter 1/8" x 1 1/4" 2
207 3311803 Nut, Slotted 1/2"-13NC 2
208 3421142 Pin, Clevis 3/4" x 2" 1
209
3450505
Pin, Cotter 5/32" x 1 1/4" 1
210 4712200 Flatwasher 3/4" Narrow 1
211 to 250 Not Used
251 Block, Chain Attach Options: 2
0560644
Extend Chain
0560588 Retract Chain
0237241
BOOM TAPE INSTALLATION - STANDARD Ref. A
301 4420018 Tape - Blue 194.4 in
302 4420016 Tape - Yellow 33.6 in.
303
4420017
Tape - Red 39.6 in.
0238692
BOOM HOSE COVERS INSTALLATION (80HX+6 AND
86HX ONLY)
Ref. 2
401
4842968
Tube Weldment 1
402 4060568 Shield (Without Notches) 2
403 4060673 Shield (With Notches) 1
404 Support, Line Options: 4
4340413
Prior to S/N 34105
4340636 S/N 34105 to Present
405 Stud (Welded on Part - Not Shown) Options: 8
4300036
Prior to S/N 34105
4300042 S/N 34105 to Present
406 4751400 Flatwasher 1/4" (Not Shown) 8
407 4761400 Lockwasher 1/4" (Not Shown) 8
408
3311401
Nut 1/4"-20NC (Not Shown) 8
BOOM LIMIT SWITCHES INSTALLATION Ref.
0237192
Australian Spec Prior To May 1995 Ref. G
0255748
Australian Spec May 1995 To Present Ref. 2
0251128 Euro Spec Ref. 4/D
501 Plate, Mounting Options: 1
3530138
Australian Spec Prior To May 1995
3534395 Australian Spec May 1995 To Present
3534395 Euro Spec
502 Switch, Limit Options: 1
4360057 Australian Spec Prior To May 1995
4360277 Australian Spec May 1995 To Present
4360277
Euro Spec
FIGURE 3-1. BOOM ASSEMBLIES (CONTINUED)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.