Tool tray pre-start inspection, Tool tray pre-start inspection -9, Tool tray installation -9 – JLG LiftPOD FS80 (1001070465) User Manual
Page 27
Advertising
SECTION 2 - PREPARATION AND INSPECTION
LIFTPOD by JLG
1001070465
www.liftpod.com
2-9
Tool Tray Pre-Start Inspection
Prior to use of the tool tray, check the following:
• Tool tray is seated securely on the platform rail.
• No cracks or bends in tray.
• Both of the clips are securely attached to the platform rail
• Capacity decal is in place and legible.
Maximum Load: The maximum permissible load on the tool tray
is 15kg (33 lb.) evenly distributed.
Figure 2-9. Tool tray installation
Advertising
This manual is related to the following products: