JLG 860SJ Parts Manual - Manual (Page 195)

3121842 800S 860SJ 4-3
SECTION 4 PLATFORM
FIGURE 4-1. PLATFORM ASSEMBLIES - FRONT ENTRY PLATFORM
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref PLATFORM ASSEMBLIES:
Ref Australian Specs
3510816 Ref 8ft (2.44m) with Self-Closing Gate/No Mesh A
3510837 Ref 8ft (2.44m) with Self-Closing Gate/Mesh to Top Rail B
3510821 Ref 6ft (1.83m) with Self-Closing Gate/No Mesh A
Ref Note: Replacement Decals Must be Ordered Separately -
See DECAL SECTION.
1 Not Used
2 0100074 AR Sealant, RTV Silicone
3 Not Used
4 2080040 13 Fastener, Huck
5 2 Hinge Options:
2600216 Standard Gate
2600219 Self-Closing Gate (Prior to SN 0300068577)
2600287 Self-Closing Gate (SN 0300068577 to SN 0300140000)
6 2940074 1 Latch
7 3311001 4 Nut #10-24NC
8 Not Used
9 See Note 1 Platform Weldment (Note: Not Available - Purchase
Complete Platform Assembly.)
10 3520072 3 Cap-Plug
11 3539685 1 Plate, Latch
12 3911008 4 Screw #10-24NC x 1in
13 4060803 6in/15cm Trim
14 4220165 1 Stop, Gate
15 Not Used
16 4751000 8 Flatwasher #10 Regular
17 1 Gate Weldment Options:
4845327 Standard Gate
4845426 Self-Closing Gate
4845951 Self-Closing Gate/Mesh to Top Rail
18 4761000 4 Lockwasher #10
19 3520172 2 Plug
0100010 AR Adhesive
Ref CE Specs
3510774 Ref 8ft (2.44m) with Drop Bar A
3510819 Ref 6ft (1.83m) with Drop Bar A
Ref Note: Replacement Decals Must be Ordered Separately -
See DECAL SECTION.
51 Not Used
52 0641418 2 Bolt 1/4in-20NC x 2-1/4in
53 0961845 2 Bushing
54 3300151 2 Nut, Acorn 1/4in-20NC
55 See Note 1 Platform Weldment (Note: Not Available - Purchase
Complete Platform Assembly.)
56 3520172 2 Cap-Plug
0100010 AR Adhesive