JLG 110HX ANSI Operator Manual - Manual (Page 64)

SECTION 4 - MACHINE OPERATION
4-12 – JLG Lift – 3120635
After towing the machine, complete the
following:
1. Actuate steer/tow selector valve for steering; push
valve knob IN to the actuated position.
2. Reconnect drive hubs by inverting disconnect cap.
(See Figure 4-5.)
3. Disconnect towbar from steering hitch and from tow-
ing vehicle. The machine is now in the driving mode.
Figure 4-6. Drive Disconnect Hug