Daily walk-around inspection points - sheet 2 -8 – JLG 120-SXJ Operator Manual User Manual

Page 24

Advertising
background image

SECTION 2 - PREPARATION AND INSPECTION

2-8

– JLG Lift –

3121809

25.

Cowling and Latches, Right Side - All cowling and
latches in working condition, properly secured, no
loose or missing part.

26.

Turntable Bearing and Pinion - No loose or missing
hardware; no visible damage, evidence of proper
lubrication. No evidence of loose bolts or looseness
between bearing and structure.

27.

Engine Air Filter - No loose or missing parts, no vis-
ible damage, element clean.

28.

Battery - Proper electrolyte levels; cables tight, no
visible damage or corrosion.

29.

Frame - No visible damage, no loose or missing
hardware (top and underside).

30.

Drive Hub, Left Rear - No visible damage, no evi-
dence of leakage.

31.

Wheel/Tire Assembly, Left Rear - Properly secured,
no loose or missing lug nuts, no visible damage.

32.

Drive Motor and Brake, Left Rear - No visible dam-
age, no evidence of leakage.

33.

Boom Sections - No visible damage; wear pads
secure. All cylinders - rod end shafts and barrel-end
shafts properly secured.

34.

Rotator and Motor - Properly secured, no visible
damage, no evidence of leakage.

35.

Platform Pivot and Slave Cylinder Attach Pins -
Properly secured; evidence of proper lubrication
where applicable.

Figure 2-5. Daily Walk-Around Inspection Points - Sheet 2

Advertising
This manual is related to the following products: