JLG 601S Operator Manual - Manual (Page 31)

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
3121218 – JLG Lift – 2-11
15. Hydraulic Oil Return Filter Housing - See Inspection
Note.
16. LP Gas Tank - See Inspection Note. (If Equipped)
17. Hydraulic Oil Supply - Recommended oil level sight
gauge. (Check level with cold oil, systems shut down,
machine in stowed position) Cap in place and secure.
18. Hydraulic Oil Breather - Element in place, not
clogged, no sign of overflow.
19. Fuel Supply - Fuel filler cap secure. Tank - See Inspec-
tion Note.
20. Door and Latches - See Inspection Note.
21. Drive Motor - See Inspection Note.
22. Spindle - See Inspection Note.
23. Tie Rod and Steering Linkage - See Inspection Note.
24. Oscillating Cam Valve - See Inspection Note. (If
Equipped)
25. All Hydraulic Cylinders - No visible damage; pivot
pins and hydraulic hoses undamaged, not leaking.
26. Oscillating Axle - See Inspection Note.
27. Horizontal Cutout Switch - See Inspection Note. No
damage to the switch, arm free to move, and free from
dirt and grease.
28. Engine Air Filter - See Inspection Note; element
clean.
29. Battery - Proper electrolyte levels; cables tight, no visi-
ble damage or corrosion.
30. Engine Oil Supply - Full mark on dipstick; filler cap
secure.
Figure 2-4. Daily Walk-Around Inspection - Sheet 3 of 4