JLG 601S Operator Manual - Manual (Page 49)

SECTION 4 - MACHINE OPERATION
3121218 – JLG Lift – 4-5
Shutdown Procedure
IF AN ENGINE MALFUNCTION CAUSES AN UNSCHEDULED SHUT-
DOWN, DETERMINE THE CAUSE AND CORRECT IT BEFORE RESTART-
ING THE ENGINE.
1. Remove all load and allow engine to operate at low
speed for 3-5 minutes; this allows further reduction of
internal engine temperature.
2. Push POWER/EMERGENCY STOP switch in.
3. Turn MASTER switch to Off.
Refer to Engine Manufacturer’s manual for detailed informa-
tion.
4.4 TRAVELING (DRIVING)
DO NOT DRIVE WITH BOOM EXTENDED OR ABOVE HORIZONTAL
EXCEPT ON A SMOOTH, FIRM AND LEVEL SURFACE.
TO AVOID LOSS OF TRAVEL CONTROL OR UPSET ON GRADES AND
SIDESLOPES, DO NOT DRIVE MACHINE ON GRADES OR SIDESLOPES
EXCEEDING THOSE SPECIFIED ON WARNING PLACARD AT PLAT-
FORM.
ASSURE THAT TURNTABLE LOCK IS ENGAGED BEFORE BEGINNING
ANY EXTENDED TRAVELING. AVOID ANY TERRAIN FEATURES WHICH
COULD CAUSE THE MACHINE TO UPSET.
TRAVEL GRADES WITH DRIVE SPEED/TORQUE SELECT SWITCH IN
THE BACKWARD (MAXIMUM TORQUE) POSITION. USE EXTREME CAU-
TION WHEN DRIVING IN REVERSE AND AT ALL TIMES WHEN DRIVING
WITH PLATFORM ELEVATED AND ESPECIALLY WHEN DRIVING WITH
ANY PART OF MACHINE WITHIN 6 FEET (2 M) OF AN OBSTRUCTION.
DO NOT USE DRIVE TO MANEUVER PLATFORM CLOSE TO AN
OBSTRUCTION...USE ONE OF THE BOOM FUNCTIONS.