JLG TF6-42 (9150-4004) Operator Manual - Manual (Page 29)

Form No. 20140, Issued 3/03 z z z z z Transformer Series Work Platform Manual
Steering
Depress footswitch, position thumb switch on Drive/Steer controller to right for
steering right, or to left for steering left.
Traveling (driving)
1. If machine is shut down, pull out Emergency Stop at Cab Controls and
place Control Station Selector switch to Platform.
2. At Platform Controls, pull out Emergency Stop switch and start engine.
3. Position Drive controller to Forward or Reverse as desired. Angle of
controller will determine travel speed.
In AWP Mode:
Maximum travel speed is 3.5 MPH with boom retracted and lowered (travel
position).
When boom is extended approximately 3.5 ft. and/or raised above 7°, the
machine will slow to Creep Mode (.5 MPH).
When in Creep Mode and returning boom to travel position, the travel control
must be returned to neutral and re-activated to increase speed above .5 MPH.
P9.1
PLATFORM OPERATION