Brother MFC 9200C - Manual (Page 53)

I N I T I A L S E T U P 4 - 3
Special characters and symbols
Press , # or 0 repeatedly to move the cursor under the special character or
symbol you want, then press to select it.
Setting Tone/Pulse Dialing Mode (For Canada only)
Your fax machine comes set to accommodate tone (multi-frequency) dialing
service.
If you have pulse (rotary) dialing service, you must change the dialing mode.
1
Press Function , 1 , 1 , 7 .
2
Press or to select TONE or
PULSE and press Set .
3
Press Stop to exit.
Setting Beeper Volume
You can set the beeper to LOW, HIGH or OFF. The default setting is LOW.
When the beeper is set to LOW or HIGH, the MFC beeps every time you press
a key or make an error, and at the end of fax sending or receiving.
1
Press Function , 1 , 1 , 3 .
2
Press or to select the volume you want and press Set .
3
Press Stop to exit.
Press (space) ! “ # $ % & ’ ( ) * + , - . /
Press # : ; < = > ? @ [ ] ^ _
Press 0 Й А И К О З Л Ц 0
N OT I C E
The Telephone Consumer Protection Act of 1991 makes it unlawful
for any person to use a computer or electronic device to send any
message via a telephone fax machine unless such messages clearly
contain, in a margin at the top or bottom of each transmitted page,
or on the first page of the transmission, the date and time it is sent
and an identification of the business or other entity or other
individual sending the message and the telephone number of the
sending machines or such business, other entity or individual.
In order to program this information into your fax machine,
complete the steps described on page 4-1.
D I A L I N G : T O N E ?
D I A L I N G : P U L S E ?