Memory full message, Multiple copies (using the scanner glass) – Brother MFC 9200C User Manual
Page 86
10 - 2
M A K I N G C O P I E S
5
Press
Mono Copy
or
Color Copy
again
.
Memory Full Message
If the memory becomes full while you
are making copies, the screen displays a
message:
If the MEMORY FULL message appears while you are scanning the first page
of your original, press
Stop
to cancel. You will need to clear some faxes from
memory before you can continue. If you were scanning subsequent page(s),
press
Mono Copy
or
Color Copy
to print the scanned pages—OR—Press
Stop
to cancel.
Multiple Copies (Using the Scanner Glass)
Use the
Options
key to choose additional settings: paper type, brightness, copy
quality, sort, and special copy options. For details about using the
Options
key,
1
Lift the Document Cover.
2
Using the document guidelines on the left, center the original face down on the
scanner glass.
3
Press
Mono Copy
or
Color Copy
.
4
Using the dial pad, enter the number of copies you want (up to 99) and press
Set
. For example, press
3
,
8
for 38 copies. The MFC starts scanning the
original.
Note
You must press the same button you pressed in Step 2.
To gain extra memory, you can turn off Fax Storage (see page 8-2.)
—OR—Print fax messages in memory (see page 5-4.).
To sort the copies, use the
Options
key. (See Using the Options Key, page 10-4)
C O P Y T O C O P Y
M E M O R Y F U L L P . 0 1
S T O P T O A B O R T
Document
Cover
White Film
Scanner
Glass