JLG DVSP Series Service Manual - Manual (Page 74)

SECTION 4 - CONTROL COMPONENTS
4-16 – JLG Lift – 3121136
Display/Controller Module - Install/Remove
Drive/Lift Mode Switch - Install/Remove
Horn Button Switch - Install/Remove
Key Switch - Install/Remove
Platform Console - Display Module
1. Display/Controller
Module (a)
2. Mounting Screws
Note: (a) Unplug all connections on the back of the module
before removing from console.
Platform Console - Drive/Lift Mode Select Switch
1. Switch Assembly (a) 2. Locking Tabs
Note: (a) Remove rear cover, unplug switch wire, press tabs to
remove.
1
2
Platform Console - Horn Switch Installation
1. Horn Button Switch (a)
2. Lock Washer 3. Nut
Note: (a) Remove rear cover, unplug wire, remove nut and lock
washer then slide switch out of console.
Platform Console - Key Switch Installaiton
1. Key Switch (a)
2. Notch 3. Attach Nut
4. Key
Note: (a) Remove mounting bracket on bottom of console to
gain access to the key switch assembly.
1
2
3