Component electrical connections -6 – JLG DVSP Series Service Manual User Manual

Page 64

Advertising
background image

SECTION 4 - CONTROL COMPONENTS

4-6

– JLG Lift –

3121136

1. Ground Control Module (a)

5. Traction Control Module (a)

9. Pump/Motor/Tank Assembly (b)

2. Left Side Battery (b)

6. Left Drive Motor Harness Reverser (a)

10. Master Disconnect Switch (c)

3. 175 Amp Fuse

7. Power Cable To Left Drive Motor/Brake (a)

4. Right Side Battery (b)

8. Power Cable To Right Drive Motor/Brake (a)

Ground Control

P1 - Horn, Alarm, Beacons, Lift Down Valve Harness (a)

P4 - Platform Junction Box Harness (a)

Module Plugs:

P2 - PHP, Elevation/Speed, Charger Limit Switch Harness (a)

P5 - Joystick Protocol Harness (a)

P3 - Programmable Security Lock Harness (Option) (a)

Notes:

(a) Apply di-electric grease JLG Part Number 3020038 to wiring harness terminals, to prevent moisture from entering module.
(b) Seal NEG (–) and POS (+) posts with battery grease to prevent corrosion.
(c) Machines equipped with the UL-EE specification (option) only.

Figure 4-2. Component Electrical Connections.

(+)

(–)

4

(+)

(+)

(+)

(–)

(–)

(–)

(–)

(+)

1

7

6

8

2

10

3

9

5

P1
P2
P5
P4
P3

M1

M2

Advertising
This manual is related to the following products: