JLG 3248RS/10RS Operator Manual - Manual (Page 55)

SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION
3121272 – JLG Lift – 3-23
3.12 PARKING AND STOWING MACHINE
1. Drive the machine to a well-protected and well-ventilated
area.
2. Ensure the platform is fully lowered.
NOTICE
WHEN THE MACHINE IS SHUT DOWN FOR OVERNIGHT PARKING OR BATTERY
CHARGING, THE EMERGENCY STOP AND POWER SELECT SWITCHES MUST BE
POSITIONED TO OFF TO PREVENT DRAINING THE BATTERIES.
3. At the ground control station, turn the platform - ground
selector key switch to OFF and remove the key to disable the
machine and prevent unauthorized use.
NOTE: For added protection, the platform control station can be
secured to it’s mounting plate see Figure 3-14.
4. At the ground control station, depress emergency stop
switch to the off position.
5. If necessary, cover the platform control box, instruction plac-
ards, caution and warning decals so that they will be pro-
tected from hostile environment.
6. Chock at least two wheels when parking the machine for an
extended period of time.
To prevent unauthorized removal, the platform control station can
be secured to it’s mount by replacing the lock pin located on it’s
mounting tab with a keyed or combination lock.
Figure 3-14. Securing Control Station to Platform
1001132362 B
1
2