JLG 3248RS/10RS Operator Manual - Manual (Page 58)

SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION
3-26 – JLG Lift – 3121272
3.14 MACHINE LIFTING AND TIE DOWN
Lifting
The machine may be lifted using a fork lift truck. Lift only from the rear
of the machine and only with the platform in the stowed position.
Adjust the width of the forklift truck, lifting tines (1) to properly fit
the machine, see Figure 3-17.
The machine can also be lifted using a spreader bar and four equal
length straps or chains capable of supporting the full gross weight of
the machine, see Figure 3-18. Lift only using the lifting lugs provided at
the four corners of the machine. (See Section 5 for machine gross weight).
Tie Down
When transporting the machine, the platform must be fully lowered in
the stowed position with the machine securely tied down to the truck
or trailer deck. There are two tie-down/lift lugs located at the front and
rear of the machine. (See Figure 3-19.)
1932RS/6RS
3248RS/10RS
Figure 3-17. Fork Lift Pockets - Location
1
1