JLG G6-42A Operator Manual User Manual
Page 144
Advertising
Section 7 - Lubrication and Maintenance
7-22
31200149
S/N 0160040678 & After
1. Perform “Shut-Down Procedure” on page 4-5.
2. Open the engine cover.
3. Check coolant level in overflow bottle (3). When coolant is hot, bottle should be
1/2 to 3/4 full. When coolant is cool, bottle should be 1/4 to 1/2 full.
4. If coolant is low, remove overflow bottle cap (4) and add coolant as required.
5. Replace overflow bottle cap.
6. Close and secure the engine cover.
Note: When filling the engine with coolant, the maximum fill rate is 2.4 gallon per
minute (9 liters per minute).
OY2340
4
5
Advertising