JLG 41EL Operator Manual - Manual (Page 43)

SECTION 5 - OPTIONAL EQUIPMENT
3120781 – JLG Lift – 5-1
SECTION 5. OPTIONAL EQUIPMENT
5.1 OPTIONAL EQUIPMENT
The EL Series machines are available with the following
optional equipment:
22" x 25" Quick-Change Platform
The 25" long by 22" wide platform features a gull wing
gate opening and is attached to the mast using the quick-
change mount.
26" x 26" Quick-Change Platform
The 26" long by 26" wide platform features a side entry
gate opening and is attached to the mast using the quick-
change mount.
28" x 26" Quick-Change Platform
The 28" long by 22" wide platform features a gull wing
gate opening and is attached to the mast using the quick-
change mount.
25" x 26" Step-in Molded Platform
w/Swing-up Gate
The 25" long by 26" wide Step-in Molded Platform features
a tough molded shell base and sides mounted to a
welded steel frame. This step-in platform features a swing-
up gate for easy entry.
Tool Tray
The tool tray is attached to the top rail of the platform
allowing for quick access to hand tools or other small
items placed in the tray.
Fluorescent Tube Caddy
The fluorescent tube caddy is attached to the top rail of
the platform allowing for convenient handling when
replacing fluorescent tubes.
Lifting Hook
The optional lifting hook is mounted at the top rear of the
first mast section. The hook is used to lift the machine up
or down to another level.
Straddle Extension Kit (Requires Straddle Adapter)
(See Section 5.2 for Installation and Use instructions)
The AM-SE Straddle Extension Kit attaches to the AM
machine allowing a user to lift the machine and move it
over obstacles up to four feet in height. This allows the
machine access to areas above the obstacle.
Ladder for Straddle Extension
This is the ladder for the AM-SE Straddle Extension Kit
which allows the user access to the AM/EL machine once
it is raised using the Straddle Kit.
Extra Power Pack (Battery, Charger & Case)
An extra power pack which includes the battery, charger
and molded case allows for extended use of an EL
machine under high cycle conditions. One power pack
can be charging while the other is in use.
Platform Auxiliary Power Lowering Device
The Platform Auxiliary Power Lowering device is a switch
activated battery backed electrical circuit designed to pro-
vide power to the platform control box in the event of loss
of the machines power supply. This can be useful to the
operator if the main battery on a DC model becomes
depleted or the AC power supply of an AC model is inter-
rupted while the platform is raised. Also if the on/off key
switch on the ground control station is turned to the off
position while the platform is still raised.
Laser Positioning Device
The laser positioning device attaches to the platform rail-
ing and when powered on projects a laser dot on any sur-
face above the machine. This allows the operator to more
accurately position the machine under a work area before
raising the platform in position.