Daily walk-around inspection -3 – JLG 41EL Operator Manual User Manual
Page 19
SECTION 2 - PREPARATION AND INSPECTION
3120781
– JLG Lift –
2-3
13.
Platform Assembly - Secure to mast; no loose or
missing parts, no visible damage. Control and
power cables, no visible damage; cables properly
tensioned and seated in control cable sheaves; con-
trol cable sheaves not damaged and rotate freely
14.
Platform Controls - Up/Down and Function Enable
buttons properly secured, no loose or missing parts,
no visible damage. Placards secure and legible,
emergency shut-off button set for operation. Control
markings legible; Operators manual enclosed in
manual storage tube.
In addition to the Daily Walk-Around Inspection, be sure to
include the following as part of the daily inspection:
Figure 2-1. Daily Walk-Around Inspection.
1
1
5
3*
4
8
9
10
11
12
13
14
2
6
7
* (Not Shown
but attached
here on back
of 36AM
and 41AM
Models)
Daily Walk-Around
Inspection Items
1.
Wheels & Casters
2.
Base Frame
3.
Tilt-Back Base Assy.
4.
Battery Box/Charger
5.
Outrigger Interlock LED’s
6.
Outrigger Sockets
7.
Outrigger Beams
8.
Motor/Pump/Reservoir Unit
9.
Manual Descent Control Valve
10.
Ground Controls
11.
Mast Installation
12.
Guard Rail Installation
13.
Platform Assembly
14.
Platform Controls