JLG 460SJ ANSI Parts Manual - Manual (Page 41)

3120789 400S 460SJ 1-33
SECTION 1 FRAME
FIGURE 1-8. DRIVE MOTOR ASSEMBLY (ORIGINAL EQUIPMENT - 4 BOLT ASSEMBLY)
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref DRIVE MOTOR ASSEMBLY
3160242 Ref 2WD Rear (Prior to SN 0300076633) F
3160298 Ref 2WD Rear (SN 0300076633 to SN 0300096000) C
3160243 Ref 4WD Front & Rear (Prior to SN 0300076633) D
3160266 Ref 4WD Front & Rear (SN 0300076633 to SN 0300096000) D
Ref NOTE: Identify motor before ordering parts. Original
Equipment Motors use 4 bolts to assemble motor. Service
Replacement Motors use 5 bolts to assemble motor. Make
sure the motor has not been replaced with a Service
Replacement Motor before ordering parts. See next
illustration for Service Replacement Motor components.
1 7022302 2 Bearing, Journal
2 Use 7022328 1 O-Ring
3 Use 7022328 1 O-Ring
4 7007446 1 Pin
5 7007438 2 Ring, Retaining
6 7022305 1 Swashplate
7 Use 7022328 1 O-Ring
8 1 Plate, Valve Options:
7022307 3160242 & 3160243 Motors
7023908 3160266 & 3160298 Motors
9 1 Cylinder Block Assembly Options (Includes Items 10-19) :
7022306 3160242 & 3160243 Motors
7023907 3160266 & 3160298 Motors
10 1 Block, Cylinder Options:
7022306 3160242 & 3160243 Motors (was p/n 7022308)
Use 7023907 3160266 & 3160298 Motors (Note: Not Available for
Purchase)
11 7021277 1 Guide, Slipper Retainer (Prior to Motor SN S-09-50-
XXXXX)
70000856 1 Guide, Slipper Retainer (Motor SN S-09-50-XXXXX to
Present)
Ref Note: If motor 3160242 or 3160243 has been updated to
use p/n 7022306 assy, use p/n 70000856 as replace-
ment).
12 7021275 3 Pin, Slipper Hold Down
13 9 Piston Assembly
7022309 3160242 & 3160243 Motors
Use 7023907 3160266 & 3160298 Motors (Note: Not Available for
Purchase)
14 7021276 1 Retainer, Hold Down Pin
15 7022310 1 Retainer, Slipper
16 7022311 1 Ring, Retaining
17 7022312 1 Spring
18 1 Washer Options:
7022313 3160242 & 3160243 Motors
7024868 3160266 & 3160298 Motors
19 7022314 1 Retainer, Spring