JLG 460SJ ANSI Parts Manual - Manual (Page 87)

3120789 400S 460SJ 2-29
SECTION 2 TURNTABLE
FIGURE 2-9. GENERATOR INSTALLATION - CATERPILLAR MACHINES (OPTIONAL)
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref GENERATOR INSTALLATION
0273050 Ref 110V/60Hz Generator (Prior to SN 0300082708) B
0274084 Ref 110V/60Hz Generator (SN 0300082708 to SN 0300096000) A
0273051 Ref 220V/50HZ Generator (ANSI Export Only) B
Ref Note: Refer to Sky Power Accessories Manual p/n 3124242
for the Miller 7500W Generator.
Ref Note: Aftermarket installation kit not available. Use items with
(*) for 110V Generator or (^) for 220V Generator.
1 0100011 AR Compound, Locking
2 0200742*^ 1 Arm, Adjusting
3 1 V-Belt Options:
0480122* 110V
0480120^ 220V
4 0641508*^ 1 Bolt 5/16in-18NC x 1in
5 0641610*^ 1 Bolt 3/8in-16NC x 1-1/4in
6 0641772*^ 1 Bolt 7/16in-14NC x 9in
7 0701217*^ 3 Bolt, Metric 12mm x 45mm
8 0721008*^ 2 Bolt #10-24NC x 1in
9 1 Generator and Control Box Assembly Options:
2460032 110V/60Hz Assembly (Prior to SN 0300082708)
2460055* 110V/60Hz Assembly (SN 0300082708 to
SN 0300096000)
2460013^ 220V/50Hz Assembly
9A 7012558 1 Generator Only - 110V/60Hz
1001100321 1 Generator Only - 220V/50Hz
Ref Note: Replacement Generators come standard with
p/n 3580134 pulley. This pulley may not be correct
for all applications. Refer to pulley options below.
1 Armature with Slip Rings Options:
7026199 Armature with Slip Rings - 110V/60Hz
70000123 Armature with Slip Rings - 220V/50Hz
7012513 4 Cap, Brush Holder
7020108 4 Brush
7020109 4 Holder, Brush
7012514 1 Fan
7020110 1 Bell, Front
7020111 1 Bell, Rear
7020190 2 Bearing
7020193 1 Cord, Power
9B 7003657 1 Box, Control - 110V/60Hz (Prior to SN 0300082708)
7019680 1 Box, Control - 110V/60Hz (SN 0300082708 to
SN 0300096000)
70002235 1 Box, Control - 220V/50Hz
AR Receptacle Options:
4460190 1 Receptacle, Standard (110V Only)
4460027 1 Receptacle, Twistlock (110V Only)
70000124 1 Receptacle, Double (220V/50Hz Only)
70000125 1 Receptacle, Single (220V/50Hz Only)